Important: The Precision DMX requires the DarkBox Programmer (sold separately) in order to change its address from the default of 1 or to store output settings for standalone operation. Only a single DarkBox Programmer is needed to configure the address and output settings for the entire system of Precision DMX fixtures.
DMX signal via mini-jack: Darklight DMX controlled products use 3.5mm mini-jacks (stereo audio tip-ring-sleeve) due to the compactness of their size. While standard DMX applications call for XLR plugs and cables, we design our devices using mini-jacks to allow for miniaturization. Users have the choice of splicing the signal cable to convert from XLR to mini-jack or to simply use off-the-shelf male to male stereo audio extension cables to carry signal. Experimentally, we’ve tested over 50 of our DMX devices daisy chained together over 300 meters without signal degradation using audio cable.
The recommended power supply for the Precision DMX is the PowerPak 5000 (sold separately), which can handle up to 16 Precision DMX fixtures at full power.
Full color control via DMX512 or DarkBox Programmer
7 channel DMX control
Built-in functions: flicker, strobe, blink, fade, color change, master dimming, color macro
Standalone mode allows set and forget operation without DMX signal (requires DarkBox Programmer)
DMX address and configuration stored in EEPROM
Low voltage and minimal heat for improved safety over incandescent sources
Internal constant current driver gives highly efficient and consistent output
Minimal maintenance required with over 50,000 hour lamp life
Indoor and outdoor use